T-shirt screen printing that’s easy and fun

Screen printing is the process of transferring a stenciled design onto a flat surface using a mesh screen, ink and a squeegee. Fabric and paper are the most commonly screen-printed surfaces, but with specialized inks it’s also possible to print onto wood, metal, plastic, and even glass. The basic method involves creating a stencil on a fine mesh screen, and then pushing ink (or paint, in the case of artwork and posters) through to create an imprint of your design on the surface beneath.

The process is sometimes called ‘silk screening’ or ‘silk screen printing’ and while the actual printing process is always fairly similar, the way the stencil is created can vary, depending on the materials used. Different stenciling techniques include:

  • Using masking tape or vinyl to cover the desired areas of the screen.
  • Painting the stencil onto the mesh using ‘screen blockers’ such as glue or lacquer.
  • Using a light-sensitive emulsion to create a stencil, which is then developed in a similar way to a photograph.

Designs made using the screen printing technique may use just one shade of ink, or several. In the case of multi coloured items, the colours must be applied in individual layers, using separate stencils for each ink.

 

T-shirt screen printing that’s easy and fun

There are various terms used for what is essentially the same technique. Traditionally, the process was called screen printing or silkscreen printing because silk was used in the process. It is also known as serigraphy and serigraph printing. Currently, synthetic threads are commonly used in the screen printing process. The most popular mesh in general use is made of polyester. There are special-use mesh materials of nylon and stainless steel available to the screen-printer. There are also different types of mesh size which will determine the outcome and look of the finished design on the material.

 

The screen printing process step by step

There are different methods of screen printing, but they all involve the same basic technique. The form of printing we’ll talk about below uses a special light-reactive emulsion to create a custom stencil; this tends to be the most popular type of commercial printing, as it can be used to make intricate stencils.

Here, we’ll talk you through the screen printing process step by step.

 

Step 1: The design is created

To start, the printer takes the design they want to create on the finished product, and prints it out onto a transparent acetate film. This will be used to create the stencil.

Step 2: The screen is prepared

Next, the printer will choose a mesh screen to suit the complexity of the design, and the texture of the fabric being printed. The mesh screen is then coated with a layer of light-reactive emulsion, which will harden when developed under bright light.

Step 3: The emulsion is exposed

The acetate sheet featuring the design is then laid onto the emulsion-coated screen, and the whole thing is exposed to a very bright light. The light hardens the emulsion, so the parts of the screen which are covered by the design remain in liquid form.

If the final design is going to include more than one colour, then a separate screen must be used to apply each layer of ink. To create multi-coloured products, the printer must use his skill to design each stencil, and line them up perfectly to ensure the final design is seamless.

Step 4: The emulsion is washed off, creating the stencil

After the screen has been exposed for a set time, the areas of the screen not covered by the design will have turned hard. Any unhardened emulsion is then carefully rinsed away. This leaves a clear imprint of the design on the screen for the ink to pass through.

The screen is then dried, and the printer will make any necessary touch-ups or corrections to make the imprint as accurate as possible to the original design. The stencil is now ready to be used.

Step 5: The Item Is Prepared For Print

The screen is then placed on the printing press. The item or garment being printed is laid down flat onto the printing board, underneath the screen.

There are a number of different presses, including manual and automatic styles, but most modern commercial printers will use an automatic rotary carousel printer, as this allows several different screens to work at once. For multi coloured prints, this sort of printer can also be used to apply the separate colour layers in quick succession.

Step 6: The ink is pressed through the screen onto the item

The screen is lowered down onto the printing board. Ink is added to the top end of the screen, and a squeegee is used to pull the ink along the full length of the screen. This presses the ink through the open areas of the stencil, imprinting the design on the product underneath.

If the printer is creating multiple items, then the screen is raised and a new garment is placed onto the printing board. The process is then repeated.

Once all the items have been printed and the stencil has served its purpose, the emulsion is removed using a special washing fluid so the mesh can be reused to create new stencils.

Step 7: The product is dried, checked and finished

The printed product then passes through a dryer, which ‘cures’ the ink and creates a smooth, colour fast finish. The final product will be checked and washed thoroughly to remove any residue, before being passed on to its new owner.